8-Port PoE SwitchPFS3010-8ET-96

Features:



• 10-port unmanaged switch with 8-port PoE.

• 8-pin simultaneous PoE power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time.

• Compatibility with IPC is enhanced. Cable loss is reduced. Loading capacity is increased.

• 2 types of transmission modes (Extend Mode On/ Extend Mode Off).

• The red port supports the IEEE802.3bt and the Hi-PoE standards, max 90W.

• Intelligent PoE controls over power consumption and offers real-time monitoring.

• Innovative PoE Watchdog can be switched on by dialing or turning on the WEB page switch.

• Supports desktop-mount installation.

• Supports IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards.

• Conforms to IEEE802.3af and IEEE802.3at power supply standard.



Technical Specifications:



• Model PFS3010-8ET-96.

• Uplink 2x 10/100/1000Mbps; PoE ports: 8x 10/100Mbps.

• PoE Power consumption: Full loadl = 96W, Idling: 3W; Port 1 = 90 W, Port 2-8 = 30 W.

• Power consumption management: yes.

• PoE PIN Assignment: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-).

• Communication standards: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3ab.

• PoE protocol: IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt.

• Switching capacity: 5.60 Gbps.

• Packet forwarding rate: 4.17 Mpps.

• Packet buffer memory: 4 Mbit.

• MAC Table size: 4K.

• Long distance PoE: 250 m long distance PoE transmission.

• Application humidity: 5%~95%.

• Power supply: 48V - 57V DC.

• Lightning Protection Common Mode: 4 kV.

• Differential mode: 2 kV.

• ESD Protection Air discharge: 8 kV.

• Contact discharge: 6 kV.

• Working temperature: -10°C~55°C.

• Weight: 0.5 kg.

• Dimensions(W×D×H): 190 mm × 100 mm × 30 mm.









Transmission Performance:

Switch power supply voltage 53V.

CAT5E/CAT6. Max. DC resistance < 10ohm/100m



Cable(m) - Load Capacity(W) - Bandwidth(Mbps)

IEEE802.3bt 90W:

100m Cable; 71.3W Load Capacity; 100Mbps Bandwidth.

150m Cable; 62W Load Capacity; 10Mbps Bandwidth.

200m Cable; 51W Load Capacity; 10Mbps Bandwidth.

250m Cable; 40W Load Capacity; 10Mbps Bandwidth.

Hi-PoE 60W:

100m Cable; 53W Load Capacity; 100Mbps Bandwidth.

150m Cable; 50W Load Capacity; 10Mbps Bandwidth.

200m Cable; 47W Load Capacity; 10Mbps Bandwidth.

250m Cable; 37W Load Capacity; 10Mbps Bandwidth.

IEEE802.3at 30W:

100m Cable; 25.5W Load Capacity; 100Mbps Bandwidth.

150m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth.

200m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth.

250m Cable; 25.5WLoad Capacity; 10Mbps Bandwidth.



Note: The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.